| Peer-Reviewed

Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System

Received: 17 September 2019     Accepted: 28 September 2019     Published: 12 October 2019
Views:       Downloads:
Abstract

In the past several years, the global diesel engine technology has made significant breakthroughs. The diesel engine has a good economy and power. In 20 years or so, the number of diesel vehicles will exceed the trend of gasoline engines. Diesel engine technology is also developing towards low pollution, low fuel consumption, and high power. To improve the performance of diesel engines, the key is to improve the conversion rate of internal energy to mechanical energy and combustion degrees. In the fuel injection system of diesel engines, a high-pressure common-rail with a large volume is often added between the plunger high-pressure fuel pump and the injector. Its function is to save fuel from the plunger fuel pump, to suppress the fluctuation of oil pressure, and to output high-pressure fuel by adjusting the characteristic parameters of the injector. Firstly, the physical model and mathematical model have been established, including the plunger pump, the high-pressure common rail, and the injector. After that, we use the modified Euler method to solve ordinary differential equations by MATLAB programming. Finally, the Optimized working strategies of plunger pump to inject diesel oil into high-pressure common rail have been obtained. In this high-pressure common rail system, cam of the plunger pump spin 1225.67 times a minute, and pressure relief valve is opened automatically when the pressure in high-pressure common-rail is over 103 MPa, so that the pressure in high-pressure common-rail is approximately stable at 100 MPa, and the fluctuation is small.

Published in American Journal of Mechanical and Industrial Engineering (Volume 4, Issue 3)
DOI 10.11648/j.ajmie.20190403.12
Page(s) 45-51
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

High-Pressure Common Rail, Plunger Pump, Differential Equations

References
[1] Common Rail injection developed for Hino engine. Paul Johnson. High Speed Diesel & Drives. 1996.
[2] New Caterpillar Fuel System Aims to Expand Markets Applications. Mike O. High Speed Diesel & Drives. 1995.
[3] A Hydro-Mechanical Simulation of Diesel Fuel Injection System. David R. Sobel, et al. SAE 870432.
[4] Development of J-Series Engine and Adoption of Common-Rail Fuel Injection System. Shin Endo, Yusuke Adachi, Yoshiki Ihara et al. SAEPaper970818.
[5] Lin Hong Bao, Research of High Pressure Common Rail Pipe Parameters on the Effects of Cavity Pressure Fluctuations. D. Chang’an University, Xi’an, China. 10710-2012525026
[6] Z. Zhao, J. Wang and Y. Liu, "User Electricity Behavior Analysis Based on K-Means Plus Clustering Algorithm," 2017 International Conference on Computer Technology, Electronics and Communication (ICCTEC), Dalian, China, 2017, pp. 484-487. doi: 10.1109/ICCTEC.2017.00111
[7] Bo Q, Yong Z, Guo D. Study on seal performance of injector nozzle in high-pressure common rail injection system [J]. Journal of the Brazilian Society of Mechanical Sciences & Engineering, 2018, 40 (2): 97.
[8] Zhang K, Huang X, Xie Z, et al. Design and optimization of a novel electrically controlled high pressure fuel injection system for heavy fuel aircraft piston engine [J]. Chinese Journal of Aeronautics, 2018, 31 (9): 127-135.
[9] Lei Z, Liu Z, Yang K, et al. Experimental study on spray characteristics of ultra high pressure common rail system for marine diesel engine [J]. Journal of Huazhong University of Science & Technology, 2018, 46 (3): 85-90.
[10] L. Yi and W. Yi, "Decision Tree Model in the Diagnosis of Breast Cancer," 2017 International Conference on Computer Technology, Electronics and Communication (ICCTEC), Dalian, China, 2017, pp. 176-179. doi: 10.1109/ICCTEC.2017.00046.
[11] Ling W, Li G, Xu C L, et al. THE INVESTIGATION OF GEOMETRIC PARAMETERS ON THE INJECTION CHARACTERISTIC OF THE HIGH PRESSURE COMMON-RAIL INJECTOR [J]. Journal of Engineering for Gas Turbines and Power, 2018.
[12] Ihme M, Ma P C, Bravo L. Computational Modeling and Analysis of Diesel-fuel Injection and Autoignition at Transcritical Conditions [J]. 2018.
[13] Tadokoro T, Kotari M, Ohtaka T, et al. Pressure Rises Due to Arc under Insulating Oil in Closed Vessel—Pressure Fluctuation of Depth Direction in Oil [J]. Electrical Engineering in Japan, 2018, 202 (2): 43-53.
[14] Zhang Yanjun, Yang Xiaodong, Liu Yi, Zheng Dayuan, Bi Shujun. Research on the Frame of Intelligent Inspection Platform Based on Spatio-temporal Data. Computer & Digital Engineering [J], 2019, 47 (03): 616-619+637.
Cite This Article
  • APA Style

    Yu Du, Cheng Qian, Yue Zhao, Yukang Wang, Peng Zhao. (2019). Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System. American Journal of Mechanical and Industrial Engineering, 4(3), 45-51. https://doi.org/10.11648/j.ajmie.20190403.12

    Copy | Download

    ACS Style

    Yu Du; Cheng Qian; Yue Zhao; Yukang Wang; Peng Zhao. Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System. Am. J. Mech. Ind. Eng. 2019, 4(3), 45-51. doi: 10.11648/j.ajmie.20190403.12

    Copy | Download

    AMA Style

    Yu Du, Cheng Qian, Yue Zhao, Yukang Wang, Peng Zhao. Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System. Am J Mech Ind Eng. 2019;4(3):45-51. doi: 10.11648/j.ajmie.20190403.12

    Copy | Download

  • @article{10.11648/j.ajmie.20190403.12,
      author = {Yu Du and Cheng Qian and Yue Zhao and Yukang Wang and Peng Zhao},
      title = {Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System},
      journal = {American Journal of Mechanical and Industrial Engineering},
      volume = {4},
      number = {3},
      pages = {45-51},
      doi = {10.11648/j.ajmie.20190403.12},
      url = {https://doi.org/10.11648/j.ajmie.20190403.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20190403.12},
      abstract = {In the past several years, the global diesel engine technology has made significant breakthroughs. The diesel engine has a good economy and power. In 20 years or so, the number of diesel vehicles will exceed the trend of gasoline engines. Diesel engine technology is also developing towards low pollution, low fuel consumption, and high power. To improve the performance of diesel engines, the key is to improve the conversion rate of internal energy to mechanical energy and combustion degrees. In the fuel injection system of diesel engines, a high-pressure common-rail with a large volume is often added between the plunger high-pressure fuel pump and the injector. Its function is to save fuel from the plunger fuel pump, to suppress the fluctuation of oil pressure, and to output high-pressure fuel by adjusting the characteristic parameters of the injector. Firstly, the physical model and mathematical model have been established, including the plunger pump, the high-pressure common rail, and the injector. After that, we use the modified Euler method to solve ordinary differential equations by MATLAB programming. Finally, the Optimized working strategies of plunger pump to inject diesel oil into high-pressure common rail have been obtained. In this high-pressure common rail system, cam of the plunger pump spin 1225.67 times a minute, and pressure relief valve is opened automatically when the pressure in high-pressure common-rail is over 103 MPa, so that the pressure in high-pressure common-rail is approximately stable at 100 MPa, and the fluctuation is small.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Numerical Simulation of Pressure Fluctuation in High-pressure Common-rail Fuel Injection System
    AU  - Yu Du
    AU  - Cheng Qian
    AU  - Yue Zhao
    AU  - Yukang Wang
    AU  - Peng Zhao
    Y1  - 2019/10/12
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajmie.20190403.12
    DO  - 10.11648/j.ajmie.20190403.12
    T2  - American Journal of Mechanical and Industrial Engineering
    JF  - American Journal of Mechanical and Industrial Engineering
    JO  - American Journal of Mechanical and Industrial Engineering
    SP  - 45
    EP  - 51
    PB  - Science Publishing Group
    SN  - 2575-6060
    UR  - https://doi.org/10.11648/j.ajmie.20190403.12
    AB  - In the past several years, the global diesel engine technology has made significant breakthroughs. The diesel engine has a good economy and power. In 20 years or so, the number of diesel vehicles will exceed the trend of gasoline engines. Diesel engine technology is also developing towards low pollution, low fuel consumption, and high power. To improve the performance of diesel engines, the key is to improve the conversion rate of internal energy to mechanical energy and combustion degrees. In the fuel injection system of diesel engines, a high-pressure common-rail with a large volume is often added between the plunger high-pressure fuel pump and the injector. Its function is to save fuel from the plunger fuel pump, to suppress the fluctuation of oil pressure, and to output high-pressure fuel by adjusting the characteristic parameters of the injector. Firstly, the physical model and mathematical model have been established, including the plunger pump, the high-pressure common rail, and the injector. After that, we use the modified Euler method to solve ordinary differential equations by MATLAB programming. Finally, the Optimized working strategies of plunger pump to inject diesel oil into high-pressure common rail have been obtained. In this high-pressure common rail system, cam of the plunger pump spin 1225.67 times a minute, and pressure relief valve is opened automatically when the pressure in high-pressure common-rail is over 103 MPa, so that the pressure in high-pressure common-rail is approximately stable at 100 MPa, and the fluctuation is small.
    VL  - 4
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Pharmaceutical and Chemical Engineering Academy, Southeast University, Nanjing, China

  • Electronics and Computer Engineering Academy, Southeast University, Nanjing, China

  • Electronics and Computer Engineering Academy, Southeast University, Nanjing, China

  • Computer & Software Academy, Nanjing University of Information Science & Technology, Nanjing, China

  • Political and Law Academy, Shihezi University, Shihezi, China

  • Sections