Volume 3, Issue 3, May 2018, Page: 34-38
Analysis and Disposal for Vibration of Vertical Circulating Water Pump
Han Lizheng, Department of Vessel and Machinery, China Chengda Engineering Co., Ltd, Chengdu, China
Received: May 24, 2018;       Accepted: Jun. 27, 2018;       Published: Jul. 25, 2018
DOI: 10.11648/j.ajmie.20180303.11      View  1105      Downloads  121
Based on the vibration of circulating water pump in a coal-firing power plant phase II in Indonesia, analysis had been carried out from different aspects for the problem. The key factors concluded were insufficient taper plates and unqualified secondary grouting. Meanwhile, single foundation, high structure above the foundation, higher speed than normal and insufficient structural stiffness were formed the influence factors, which led to the undesirable disposal results. The vibration of 3B was still exceeding 4.5mm/s specified by the standard, 3A was just meeting the value, and the vibration of 4A, 4B was 2.8mm/s. The advice and suggestion had been summarized.
Vertical Circulating Water Pump, Vibration, Analysis, Disposal, Taper Plates, Secondary Grouting, Insufficient Structural Stiffness
To cite this article
Han Lizheng, Analysis and Disposal for Vibration of Vertical Circulating Water Pump, American Journal of Mechanical and Industrial Engineering. Vol. 3, No. 3, 2018, pp. 34-38. doi: 10.11648/j.ajmie.20180303.11
Copyright © 2018 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
WANG Wei. Analyzing and Improvement of Cavitation for Circulating Water Pump in Chemical Industry [J]. Energy Conservation in Petroleum & Petrochemical Industry, 2017, 7(8): 24-27.
JIAO Hongrui, LIANG Yaxun. Analyzing and Solution of Vibration for Circulating Water Pump in Nuclear Power Station [J]. Pump Technology, 2016(3): 42-46.
ISO10816-3: Mechanical Vibration—Evaluation of Machine Vibration by Measurements on Nonrotating Parts, Part 3: Industrial Machines with Nominal Power above 15 kW and Nominal Speeds between 120 r/min and 15000 r/min when Measured in Situ [S].
ZHOU Jing, DUAN Xueyou. Analysis of Heat Supply Network Circulation Pump Vibration in 350 MW Supercritical Unit and Its Disposal [J]. Inner Mongolia Electric Power, 2017, 35(4): 81-83.
HOU Zhenyu, QU Shidong. Analysis and Solutions for Vibration of Circulating Water Pump [J]. Chemical Engineering & Machinery, 2010(5): 666~667.
LI Jun, WANG Yanshan. The Fault Analysis of the Vertical Circulating Pump’s Strong Vibration [J]. Shanxi Electric Power, 2014(2): 63~66.
JU Lietao, TAO Shai. Reduce 88LKXA-20 Circulating Water Pump Vibration Analysis and Application [J]. Jiangxi Energy, 2015(4): 65-69.
ZHU Cheng. Analysis and Solutions for Vibration of Circulating Water Pump in Coal-fired Power Plant [J]. China New Technologies and Products, 2013, NO. 08: 108~109.
WANG Lu. Analysis and Solutions for Abnormal Vibration of Circulating Water Pump [J]. Huadian Technology, 2012, 34(5): 56-59.
WANG Sheng’en, ZHAO Guoquan, ZHU Jianhua. Solutions Discussion for Vibration of 48LKXB232 Type Circulating Water Pump [J]. China Science and Technology Review, 2009(3): 6-6.
HUNAN XEMC CHANGSHA PUMP WORKS CO., LTD. Installation Manual of Circulating Water Pump [Z].
Browse journals by subject